Printer User Manual

MSI Mod 10/10 Barcodes

Programmer Reference Guide U26169-J-Z716-1-7600

The control characters are coded as follows:

– ($) hexadecimal: 67

– (%) hexadecimal: 68

– (/) hexadecimal: 69

– (*) hexadecimal: 6A

The control characters are printed in plain text within a closed circle.

MSI Mod 10/10

The character complement of the MSI Mod 10/10 code comprises:

– 10 digits: 0 1 2 3 4 5 6 7 8 9

– 1 start character: : (X’3A in ISO 7-bit or X’7A in EBCDIC)

– 1 stop character: ; (X’3B in ISO 7-bit or X’5E in EBCDIC)

The number of characters is variable. The start/stop characters are programmed with the

characters : and ;.

In the plain text line, these characters are printed for start/stop.

A check digit is required and must be programmed in the application (and must be modulo

10 from a checksum generated in several stages).

The ratio of wide to narrow elements is fixed and is always 2 : 1.

The blank zone before and after the barcode symbol should be at least 10 times the width

of a narrow element.