Installation Guide

Equipment List
Standard Installation – What you will need:
Certified Electrician (Recommended) Cordless Drill (Phillips Bit with extender) Stud Finder
 V AC Voltmeter NEMA - Outlet (Only used for the
A charger P/Ns EM-AF-AA,
EM-CF-FA.)
/” Socket wrench
Screwdriver # C copper wire should be used for
A charger and # C copper wire
should be used for a A charger.
NOTE: . Wire must have a temperature
rating of C or higher). . Do not set
the amp switch higher than A unless
hardwired to a dedicated A branch
protection circuit breaker.
A charger requires a -pole, V,
A circuit breaker. A charger requires
a -pole, V, A circuit breaker.
Installation kit

Quick start installation guide | VersiCharge™ AC