Installation Guide

Wi-Fi LED Light Sequence When Adding a Charger
Description of Sequence LED Color (Blinking) LED Color (Steady)
Power up
Software loading
Software running
Charger in Access Point (AP) mode
Receiving connection credentials
Received connection credentials
Connecting to network
Connected to network
Connecting to VersiCloud
Connected to network, registered and connected to VersiCloud
NOTE: Grey LED Color indicates no lit LED.
Light State Description Solution
Normal Operation
Light # Ready to Charge – Power On –
Light steady white
Connect EV. Begin charge.
Light # Car Connected -
Light steady white
Disconnect the EV connection cable.
Light # ( Min.)
Light # ( Min.)
No Internet
Light blinking white for  min. and green
for  min.
. Mode: Wi-Fi - Check router
. Mode: Cellular - Check cellular network settings, if
APN and Modem dial string setting are correct, call
carrier.
. Mode: Ethernet - Check cable /network connection.
Light # Lost communication with VersiCloud . Slow blinking blue - weak signal (if it’s Wi- Fi
network, try Wi-Fi extender, if cellular - contact
carrier, add a signal booster).
. Fast blinking blue - power cycle, if issue persists,
call Tech Support.
Light # Connected to the Internet and VersiCloud
– Light steady white
No Action.
Light # Time Delay Light - Delay  hours – Light
blinking white
Wait for charge.
Light # Time Delay Light - Delay  hours – Light
blinking white
Wait for charge
Light # Time Delay Light - Delay  hours – Light
blinking white
Wait for charge
Light # Time Delay Light - Delay  hours – Light
blinking white
Wait for charge
Light # Touch Sensitive Button – Press Button for 
seconds to maximize power level.
Cancel the remote power setting by pressing button
 seconds continuously and maximizes Power.
APPENDIX A – System Operation/Faults

Quick start installation guide | VersiCharge™ AC