Datasheet

ManualsBrandsSiemens ManualsPressure SensorsPressure Transmitter 0-16 bar G1/2

Pressure Measurement

Transmitters for basic requirements

SITRANS P200

for gauge and absolute pressure

2/8

Siemens FI 01 · 2012

■

Selection and ordering data Order No. Order code

SITRANS P 200 pressure transmitters for pressure and absolute pressure for general applications

Accuracy typ. 0.25 %

Wetted parts materials: Ceramic and stainless steel + sealing material

Non-wetted parts materials: stainless steel

7M F 1 5 6 5 -

77777

7777 777

Output signal

4 ... 20 mA; two-wire system; power supply 7 ... 33 V DC (10 ... 30 V DC for ATEX versions) } 0

0 ... 10 V; three-wire system; power supply 12 ... 33 V DC } 1 0

Explosion protection (only 4 ... 20 mA)

None } 0

With explosion protection EEx ia IIC T4 } 1

Electrical connection

Connector per DIN EN 175301-803-A, stuffing box thread M16 (with coupling) } 1

Round connector M12 per DIN EN 60139-9 (not for gauge pressure ranges ≤ 16 bar) 2

Connection via fixed mounted cable, 2m (not for type of protection "Intrinsic safety i") 0 3

Cable quick screw connection PG9 (not for type of protection "Intrinsic safety i") 0 4

Connector per DIN EN 175301-803-A, stuffing box thread 1/2"-14 NPT (with coupling) 5

Connector per DIN EN 175301-803-A, stuffing box thread PG11 (with coupling) 6

Special version 9 N 1 Y

Process connection

G½" male per EN 837-1 (½" BSP male) (standard for metric pressure ranges mbar, bar) } A

G½" male thread and G1/8" female thread B

G¼“ male per EN 837-1 (¼“ BSP male) C

7/16"-20 UNF male D

¼"-18 NPT male (standard for pressure ranges inH

O and psi) E

¼"-18 NPT female F

½"-14 NPT male G

½"-14 NPT female H

7/16"-20 UNF female J

M20x1.5 male P

Special version Z P 1 Y

Sealing material between sensor and enclosure

Viton (FPM, standard) } A

Neoprene (CR) B

Perbunan (NBR) C

EPDM D

Special version Z Q 1 Y

Version

Standard version } 1

Further designs

Supplement the order no. with "-Z" and add order code.

Manufacturer’s test certificate M per DIN 55340, Part 18 and ISO 8402 (calibration certificate) supplied C11

Oxygen application, oil and grease-free cleaning

( only in conjunction with the sealing material Viton between sensor and enclosure)

E10

}

Available ex stock

Subject to export regulations AL: N, ECCN: EAR99H.

FI01_2012_en_kap02.book Seite 8 Donnerstag, 17. November 2011 4:31 16