Datasheet

Data sheet 6GT2600-4AF00

Product type designation MDS D422 transponder

Transponder MDS D422 for RF200/RF300 ISO M20 for screwing into

metal, ISO 15693, Chip type FUJITSU MB89R118, 2000 byte FRAM

User memory 20x 6 mm (DxH); Minimum order quantity 5 units

Wireless frequencies

Operating frequency / Rated value 13.56MHz

Range / maximum 19mm; range is reader dependent: observe

http://support.automation.siemens.com/WW/view/en/67384964

Protocol / with radio transmission ISO 15693

Transfer rate / with radio transmission / maximum 26.5kbit/s

Product feature / multitag-capable Yes

Electrical data

Product component / Backup battery No

Memory

Type of memory FRAM

Storage capacity / of the user memory 2000byte

Type of memory organization UID (fixed code) 8 bytes, user memory 2000 bytes, configuration

memory 40 bytes

Number of read cycles / at ambient temperature < 40

°C / maximum

1000000000000

Number of write cycles / at ambient temperature < 40

°C / maximum

1000000000000

6GT2600-4AF00 Subject to change without notice

Page 1/

PAGE 1
Data sheet Product type designation 6GT2600-4AF00 MDS D422 transponder Transponder MDS D422 for RF200/RF300 ISO M20 for screwing into metal, ISO 15693, Chip type FUJITSU MB89R118, 2000 byte FRAM User memory 20x 6 mm (DxH); Minimum order quantity 5 units Wireless frequencies Operating frequency / Rated value 13.56 MHz Range / maximum 19 mm; range is reader dependent: observe http://support.automation.siemens.
PAGE 2
Data retention time / at ambient temperature < 40 °C / not less than 10 y Property of memory Block-by-block write protection of the user memory Type of transponder chip used Fujitsu MB89R118 Mechanical data Material PA6.