User Manual

Ordering/scope of delivery
When ordering, please specify the quantity, product name and type code.
Type Order No. Specification No.
DP/P-bus link 6FL6301-2FA01
28/400333
When ordering DESIGO I/O modules, please remember to include accessories
such as the transformer, supply terminal block, mains terminal block, address
plug and I/O strips of the appropriate length.
Technical data
Type DP/P-bus link
Power supply Operating voltage AC 24 V +
10%
Frequency 50/60 Hz
Power consumption of DP/P-bus link
including DESIGO I/O modules
(128 load units)
60 VA
Internal fuse protection None
Ports/interfaces Protection standard to EN 60529 IP20
P bus See data sheets
CM2N8022 (process bus) and
CM2M8102 (I/O modules and P-bus)
Max. 128 load units
Permissible cable length
subject to data in the above data
sheets
50m, local bus
Remote bus not yet released
Profibus DP 9-pin female sub-D connector RS 485
Baud rate
2.4 kbits/s ...12 Mbit/s
Service
(Not used at present)
RJ45
RS 232 version
Accessories Plug For connection of supply voltage and P-bus
Ambient conditions Operation: Temperature 0 ... 50
o
C
Operation: Humidity < 85 % rh
Transport: Temperature -25 ... 65
o
C
Transport: Humidity < 95 % rh
Industry standards Automatic electronic controls for
household and similar use
IEC / EN 60 730-1
Electromagnetic compatibility
Interference immunity IEC / EN 61 000-6-2
Interference emission IEC / EN 61 000-6-3
Dimensions See dimension diagrams
Width in DIN modular spacing units
8.5
Weight Including packaging 0.25 kg
Product safety CE conformity as per EMC directive 89/336/EEC, and
low voltage directive 73/23/EEC
8/12
Siemens Building Technologies DP/P-bus link CK1N9871en
Building Automation 23.04.2003