User Manual

Design
The DP/P-bus link consists of a housing base, a housing cover and the printed circuit
board with connection terminals. The unit also has a service socket and service LEDs.
Connection terminals
Connection terminal
Housing cover
Lugs for cable tension relief
Housing base
Service socket and
Service LEDs
Cable restraints are essential for the wires to the AC 24 V terminals.
The conductors must be secured with cable ties (see diagram) to the lugs provided
for this purpose on the base unit.
Note
5/12
Siemens Building Technologies DP/P-bus link CK1N9871en
Building Automation 23.04.2003