User Manual

ManualsBrandsSiemens ManualsBuilding automationSystem software

CK1N9856en

07.09.2001

Siemens Building Technologies

Building Automation

856

SICLIMAT™ X

System software

ZLXSICX

The system software covers all HVAC-specific functions for the management and

automation levels of the SICLIMAT X building management system.

Use

The overall SICLIMAT X system is used to operate buildings of all sizes and for all

purposes. The system software incorporates all the functions at the management and

automation levels necessary to optimize the use of the building services plant. The

software comprises the following function groups:

• Operation and monitoring

• Archiving

• Documentation (reports)

• Information

• Administration

• Optimization

• Interfaces

The software is resident on the main X-OS central station and the AS automation

station. Several automation stations can be operated in parallel under one X-OS

central station. Several systems of this type, operating in parallel, can be networked to

create an overall system.

Summary of content (8 pages)

PAGE 1
9 856 SICLIMAT™ X System software ZLXSICX The system software covers all HVAC-specific functions for the management and automation levels of the SICLIMAT X building management system. Use The overall SICLIMAT X system is used to operate buildings of all sizes and for all purposes. The system software incorporates all the functions at the management and automation levels necessary to optimize the use of the building services plant.
PAGE 2
Features SICLIMAT X is an open system: • Use of industry standards • Documented interfaces SICLIMAT X is future-proof: • • • • Modular expandability Client-Server architecture Assurance of upward compatibility (automation stations with LS300 B since 1976 ) Ability to handle large quantities of data by use of the DCOS principle (dynamic change of state) SICLIMAT X is easy to use: • Graphical user interfaces with menu-driven operation for all system functions • Fast access to the main system functions •
PAGE 3
Processing functions • Self-monitoring Monitoring • • • • Open loop control • • • • • Start-up control Motor control Sequencing Safety interlocks Frost protection circuits Closed loop control • • • • Fixed value controllers Sequence controllers, cascade controllers with and without interference variables Limit controllers Heating controllers Logging and processing of messages Definition of limit values for measured values Counter value monitoring with definition of limit values Command run-time mo
PAGE 4
Individual room control processes • • • • • • Control of operating mode Controller curve change-over Down-draught compensation Summer/winter compensation Morning boost / Fast cooling Primary plant control Management level Higher-level tasks affecting the overall operation of the building are processed at the management level.
PAGE 5
Reports The data used in the reports is derived from the database and from the process. For this purpose, the usual database selection mechanisms and database compression functions are used.
PAGE 6
Configuration Minimum configuration Operator station SICLIMAT-X-OS Automation stations Typical configuration Operator stations SICLIMAT-X-OS ............ Automation stations 6/8 Siemens Building Technologies Building Automation System software CK1N9856en 07.09.
PAGE 7
Ordering When ordering, please specify the quantity, product name and type code. Type SICLIMAT X V3.1 system software package Order No. 6FL4414-2AC01 Specification No. 11/24200 Technical data System requirements Type Software Hardware requirements for the management station Hardware requirements for the automation-level software Items supplied System software SCO-Unix, ORACLE, X11, OSF/Motif and SCO driver and NCD configuration files.
PAGE 8
/8 ã 2001 Siemens Building Technologies Ltd. Siemens Building Technologies Building Automation System software Subject to change CK1N9856en 07.09.