User Manual

6 / 8
Siemens CP 343-1 BACnet – 6FL4343-1CX10-0XE0 CM1N9291en_02
Building Technologies 17 Sep 2009
Engineering notes
STEP 7 V5.4 SP4 or higher and NCM S7 for Industrial Ethernet plus hardware
support package (HSP) is required to engineer CP 343-1, CP343-1 BACnet
(6FL4343-1CX10-0XE0) inclusive. The engineering data of the CP are saved to the
CPU. This allows for module group exchange without PG.
Visit our SIMATIC NET homepage on the Internet at:
http://www.automation.siemens.com/net/index_76.htm
This is where you find information on our products and solutions along with news
on SIMATIC NET as well as information on events and professional publications.
See
https://mall.automation.siemens.com/de/guest/gui
RegionSelector.asp?lang=en
for a description of the SIMATIC NET products.
For technical issues on CP343-1 BACnet, contact:
Common Support Entry:
Siemens Switzerland Ltd
SBT HQ
Tel: [phone]
Fax: [phone]
Email: [e-mail]