User Manual

6/6
Siemens Building Technologies SIMATIC S7 SCADA system interface CK1N9827en
Landis & Staefa Division 09.03.2001
Operation and monitoring Data type: Plant
Operating mode, measured value,
setpoint, fault, interlock release,
optimisation, hours run
Data type: Signalling
Actual status, fault, stored status
Data type: Switch command
Operating mode, setpoint, measured
value, fault, interlock release,
optimisation, hours run
Data type: Measured value
Measured value, fault, out-of-limits
Data type: Control command
Operating mode, setpoint, measured value,
fault
Data type: Controller
Operating mode, setpoint, measured value,
fault
Data type: Numerical value
Measured value, fault, delete, out-of-limits
SCADA structure data Variable names
SICLIMAT user address or
hardware address
Addressing the SICLIMAT
automation station
Data module number, data byte and bit
Additional info for
analogue variable
Unit text (engineering units)
Additional information for
bit and byte variable
Status text
ã 2001 Siemens Building Technologies Ltd. Subject to changes