User Manual

ManualsBrandsSiemens ManualsBuilding automationSIMATIC S7 interface for SCADA systems

CK1N9827en

09.03.2001

Siemens Building Technologies

Landis & Staefa Division

827

SICLIMAT™ X

SIMATIC S7 interface for

SCADA systems S7-SCADA

Open data interface for the connection of SCADA systems to the SICLIMAT

automation stations based on the SIMATIC S7.

Use

The SIMATIC S7 SCADA interface is a convenient solution for the connection of

SCADA systems to SICLIMAT X.

The purpose of a SCADA system (Supervisory Control and Data Acquisition) is to

integrate various items of equipment irrespective of their manufacturers.

The SCADA system makes it possible to present the user with a uniform operator

interface and uniform functional scope. SCADA standardises the separation of the

automation level from the management level.

Unlike the SICLIMAT X management system, a SCADA system offers only a limited

range of functions, comprising signalling, operation & monitoring, trend logging and

archiving.

With the SCADA interface, it is also possible to connect other systems which access

the operating, monitoring and signalling data. These third-party systems may include,

for example:

• Human-machine interfaces of all kinds (e.g. operator panels)

• Office programs running under Microsoft Windows with integrated process data

• Mimic diagrams controlled by another PLC

Summary of content (6 pages)

PAGE 1
9 827 SICLIMAT™ X SIMATIC S7 interface for SCADA systems S7-SCADA Open data interface for the connection of SCADA systems to the SICLIMAT automation stations based on the SIMATIC S7. Use The SIMATIC S7 SCADA interface is a convenient solution for the connection of SCADA systems to SICLIMAT X. The purpose of a SCADA system (Supervisory Control and Data Acquisition) is to integrate various items of equipment irrespective of their manufacturers.
PAGE 2
System configuration Sample configuration of a plant incorporating a SCADA system: SCADA system SICLIMAT engineering tool SICLIMAT OP 7/17 SICLIMAT AS S7-400 SICLIMAT AS S7-300 This configuration consists of a SCADA system, a SIMATIC net bus system, SICLIMAT automation stations based on the SIMATIC S7-300 / 400, and, as options, the SICLIMAT OP7/17 local operator panel and the SICLIMAT X-PG engineering tool. The engineering tool is temporarily connected in the engineering phase.
PAGE 3
documentation and the SCADA Import file. The import files are supplied on external data storage media. The user imports this data into the SCADA system. This causes the variable structures, including user addresses and unit and status text, to be generated automatically. The SCADA system (graphics, signalling functions etc.) is engineered via the user address.
PAGE 4
Automation station accessories Run-time licence for basic HVAC modules Licence for one-off use of modules from the SICLIMAT module library on an automation station. One licence is required for each SIMATIC CPU. Industrial Ethernet communications processor for SIMATIC S7 SIMATIC communications processor CP 343-1 / CP 443-1, used to network the SIMATIC automation stations with SCADA or third-party systems via Industrial Ethernet.
PAGE 5
Ordering When ordering, please specify the quantity, product name and type code. Type SW package S7 SCADA interface Accessories Basic HVAC module run-time licence per automation station SIMATIC CP 343-1 Industrial Ethernet for S7-300 SIMATIC CP 443-1 Industrial Ethernet for S7-400 SIMATIC CP 343-5 Profibus for S7-300 SIMATIC CP 443-5 Profibus for S7-400 Order No. 6FL3101-1CA00 Specification No.
PAGE 6
Operation and monitoring Data type: Plant Data type: Signalling Data type: Switch command Data type: Measured value Data type: Control command Data type: Controller SCADA structure data Data type: Numerical value Variable names Addressing the SICLIMAT automation station Additional info for analogue variable Additional information for bit and byte variable 6/6 Siemens Building Technologies Landis & Staefa Division ã 2001 Siemens Building Technologies Ltd.