User Manual

ManualsBrandsSiemens ManualsBuilding automationEngineering tool Software X-PG V41

918

SICLIMAT™ X

Engineering tool

Software X-PG V41

X-PG-SW

Engineering tool X-PG to generate SICLIMAT automation software for the

automation stations SIMATIC S7-300 and S7-400. The software is delivered on

data media and can be installed on available SIMATIC programming device

Power-PG or on a professional notebook.

CK1N9918en

12.03.2008

Building Automation

Siemens Building Technologies

Summary of content (4 pages)

PAGE 1
9 918 SICLIMAT™ X Engineering tool X-PG-SW Software X-PG V41 Engineering tool X-PG to generate SICLIMAT automation software for the automation stations SIMATIC S7-300 and S7-400. The software is delivered on data media and can be installed on available SIMATIC programming device Power-PG or on a professional notebook. CK1N9918en 12.03.
PAGE 2
Use The software package X-PG installs the engineering tool X-PG on an existing programming device or professional notebook. The engineering tool X-PG offers a complete solution for engineering and commissioning SICLIMAT automation stations SIMATIC S7-300 and S7-400. The X-PG is especially well suited as an engineering tool when flexible on-site use is required or when the SICLIMAT automation station is operated stand-alone or networked with operation/monitoring/reporting (e.g.
PAGE 3
Building automation and control tasks are solved with the aid of both block libraries. The user receives a package of specially designed building automation and control software blocks for all aspects of building automation and control. In addition to universally employable functions such as binary processing, analog processing, control and signal processing, this includes complex technical building functions such as scheduling, twin pump control, heating curve.
PAGE 4
Accessory: USB adapter An MPI interface is required to load and test SIMATIC S7. Depending on the device, this may be accomplished as a PCI component, PCMCIA card, serial adapter or as an USB adapter. We recommend using the USB adapter, if the MPI interface is not already available. Accessories: Runtime license for SICLIMAT standard blocks License for the one-time use of blocks from the SICLIMAT block library on one automation station.