Data Sheet

Number of terminal levels 1
Number of terminal points / per terminal level 1
Number of terminals 28; 8 x I/O; 10 x L+, 10 x M
Type of connecting terminal Push-In
Type of electrical connection / for actuators and
sensors
Push-In
Position / of the terminal Top
Design of LED initiator/actuator terminal Push-In
Width of screwdriver blade 3.5mm
Design of terminal / Terminal levels internally linked No
Product component
● PE connection
No
● Shield connection
No
● Disconnector
Yes
● required / connection plate
No
Product feature / Infeed function Yes
Product feature / cross-connectable No
Number of cables / per connection 2; Connection for internal system: Combination of 1 or 2 Wires
until the sum total of cross sections be achieved in a ferrule.
Type of connectable conductor cross-sections / solid No
Connectable conductor cross-section
● for flexible conductor / with core end processing
0.2...2.5mm²; End sleeve according to DIN 46228/1 or DIN
46228/4 with plastic collar
● stranded
0.2...2.5mm²
● finely stranded / without core end processing
0.2...2.5mm²
● finely stranded / with core end processing
0.2...2.5mm²
Number of poles / at the 1st interface 16; the IDC connector for the connection cable
Type of electrical connection / for connecting cable Plug-in connection
number of the plug contacts / of the electrical
connection
1
Wire length / maximum 30m; between front connector module and Connection module
General data
Mounting type DIN rail 35 mm, DIN rail 15 mm
Installation or assembly note any
Mounting position any
Degree of pollution 2
Overvoltage category 2
Combustibility class acc. to UL 94 V1
Insulation material other
Design tested acc. to type of protection / EEx e No
Certificate of suitability / cULus approval Yes
Equipment marking / acc. to DIN EN 81346-2 X
Color
6ES7924-0CH20-0BC0 Subject to change without notice
Page 2/
3
06/12/2019 © Copyright Siemens