Datasheet

ManualsBrandsSiemens ManualsAutomationOutput Module SIMATIC ET 200 AL

Data sheet 6ES7144-5KD00-0BA0

SIMATIC ET 200AL, AI 4XU/I/RTD, 4x M12, Degree of protection

IP67

General information

Product type designation AI 4xU/I/RTD

HW functional status FS04

Firmware version V1.0.x

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

STEP 7 V13 SP1 or higher

● STEP 7 configurable/integrated as of version

From V5.5 SP4 Hotfix 3

● PROFIBUS as of GSD version/GSD revision

GSD as of Revision 5

● PROFINET as of GSD version/GSD revision

GSDML V2.3.1

Supply voltage

Load voltage 1L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

20.4V

● permissible range, upper limit (DC)

28.8V

● Reverse polarity protection

Yes; against destruction

6ES7144-5KD00-0BA0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6ES7144-5KD00-0BA0 SIMATIC ET 200AL, AI 4XU/I/RTD, 4x M12, Degree of protection IP67 General information Product type designation AI 4xU/I/RTD HW functional status FS04 Firmware version V1.0.x Product function ● I&M data Yes; I&M0 to I&M3 Engineering with ● STEP 7 TIA Portal configurable/integrated as of version STEP 7 V13 SP1 or higher ● STEP 7 configurable/integrated as of version From V5.
PAGE 2
Input current Current consumption (rated value) 35 mA; without load from load voltage 1L+ (unswitched voltage) 4 A; Maximum value from load voltage 2L+, max. 4 A; Maximum value Encoder supply Number of outputs 4 24 V encoder supply ● Short-circuit protection Yes; per channel, electronic ● Output current, max. 0.5 A; Per channel, total current of all channels max. 1 A Power loss Power loss, typ. 1.
PAGE 3
— Input resistance (0 to 150 ohms) ● 0 to 300 ohms — Input resistance (0 to 300 ohms) 10 MΩ Yes 10 MΩ Cable length ● shielded, max. 30 m Analog value generation for the inputs Measurement principle integrating Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max.
PAGE 4
Basic error limit (operational limit at 25 °C) ● Voltage, relative to input range, (+/-) 0.25 % ● Current, relative to input range, (+/-) 0.25 % ● Resistance, relative to input range, (+/-) 0.15 % ● Resistance thermometer, relative to input range, (+/-) 0.15 % Interference voltage suppression for f = n x (f1 +/- 0.5 %), f1 = interference frequency ● Series mode interference (peak value of interference < rated value of input range), min.
PAGE 5
● min. -30 °C ● max. 55 °C Connection method Design of electrical connection for the inputs and outputs M12, 5-pole Design of electrical connection for supply voltage M8, 4-pole ET-Connection ● ET-Connection M8, 4-pin, shielded Dimensions Width 30 mm Height 159 mm Depth 40 mm Weights Weight, approx.