Datasheet

Alarms
● Diagnostic alarm
Yes; Parameterizable
Diagnostic messages
● Short-circuit
Yes; Sensor supply to M; module by module
Diagnostics indication LED
● Channel status display
Yes; green LED
● for module diagnostics
Yes; green/red LED
Potential separation
between the load voltages Yes
Potential separation channels
● between the channels
No
● between the channels and backplane bus
Yes
● between the channels and the power supply of
the electronics
No
Isolation
Isolation tested with 707 V DC (type test)
Degree and class of protection
IP degree of protection IP65/67
Standards, approvals, certificates
Suitable for safety-related tripping of standard
modules
Yes; From FS01
Highest safety class achievable for safety-related tripping of standard modules
● Performance level according to ISO 13849-1
PL d
● Category according to ISO 13849-1
Cat. 3
● SILCL according to IEC 62061
SILCL 2
Ambient conditions
Ambient temperature during operation
● min.
-30°C
● max.
55°C
Connection method
Design of electrical connection for the inputs and
outputs
M8, 3-pole
Design of electrical connection for supply voltage M8, 4-pole
ET-Connection
● ET-Connection
M8, 4-pin, shielded
Dimensions
Width 30mm
Height 159mm
Depth 40mm
Weights
6ES7141-5BF00-0BA0 Subject to change without notice
Page 3/
4
02/05/2020 © Copyright Siemens