Datasheet

Data sheet 6EP4438-7EB00-3DX0

SITOP SEL1400 SELECTIVITY MODULE 8* 10A

SITOP SEL1400 10 A Selectivity module 8-channel with limiting

characteristic Input: 24 V DC/60 A output: 24 V DC/8x 10 A

Threshold adjustable 2-10 A with monitoring interface

Input

Type of the power supply network Controlled DC voltage

Supply voltage / at DC / Rated value 24V

Input voltage / at DC 20.4...30V

Overvoltage overload capability 35 V

Input current / at rated input voltage 24 V / Rated

value

60A

Output

Voltage curve / at output controlled DC voltage

Formula for output voltage Vin - approx. 0.2 V

Relative overall tolerance / of the voltage / Note In accordance with the supplying input voltage

Number of outputs 8

Output current / up to 60 °C / per output / rated value 10A

Adjustable pick-up value current / of the current-

dependent overload release

2...10A

Type of response value setting via potentiometer

Product feature / parallel switching of outputs Yes

Product feature / bridging of equipments No

6EP4438-7EB00-3DX0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6EP4438-7EB00-3DX0 SITOP SEL1400 SELECTIVITY MODULE 8* 10A SITOP SEL1400 10 A Selectivity module 8-channel with limiting characteristic Input: 24 V DC/60 A output: 24 V DC/8x 10 A Threshold adjustable 2-10 A with monitoring interface Input Type of the power supply network Controlled DC voltage Supply voltage / at DC / Rated value 24 V Input voltage / at DC 20.4 ...
PAGE 2
Type of outputs connection Connection of all outputs after ramp-up of the supply voltage > 20 V; delay time of 25 ms, 200 ms, 500 ms or "load-optimized" can be set via DIP switch for sequential connection Efficiency Efficiency in percent 99 % Power loss [W] / at rated output current / for rated value of the output current / typical 15 W Switch-off characteristic per output Switching characteristic ● of the excess current Iout = 1.0 ...1.5 x set value, switch-off after approx.
PAGE 3
Type of electrical connection Push-in ● at input 24V1, 24V2: push-in for 0.75 ... 16 mm²; 0V1, 0V2: push-in for 0.2 ... 4 mm² ● at output 1 - 8: push-in for 0.2 ... 4 mm² ● for signaling contact 13, 14: push-in for 0.2 ... 1.5 mm² ● for auxiliary contacts RST: push-in for 0.2 ... 1.5 mm² Width / of the enclosure 45 mm Height / of the enclosure 135 mm Depth / of the enclosure 125 mm Installation width 45 mm Mounting height 225 mm Net weight 0.