User manual

Mounting/removal
4.1 UPS1600
SITOP UPS1600 / UPS1100
98 Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
4.1.1
Signal connector
Mounting
Push connector on socket ④ in the housing.
Removal
To remove the signal connector, press the release lever (4b) (see Figure 4-2
Mounting/removal: Signal connector (Page 98)) and then remove the connector.
Figure 4-2 Mounting/removal: Signal connector
4.1.2
USB connector
For deployment in an explosion-endangered environment, a USB connector with strain relief
must be used.
Mounting
Push the connector onto the socket in the housing until the strain relief (6b) snaps into the
housing (6a).
Removal
To remove the USB connector, press to release the strain relief (6b) (see Figure 4-3
Mounting/removal: USB connector (Page 98)) and then remove the connector.
Figure 4-3 Mounting/removal: USB connector