User manual

Engineering
3.6 Web server
SITOP UPS1600 / UPS1100
92 Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
The associated settings possible in the selected submenu are made in the editor area ④.
The functions of the save bar
③ are used to load the configuration into the UPS1600 and
open or save the configurations on a data medium.
The language selection
② is used to select the user interface language of the Web server.
The German, English, French, Italian, Spanish, and Chinese languages are available.
Click the "Logout"
① button to logout from the current web server session. Access to the
Web server is possible only after a new login.
If another controller (DC UPS Manager or an S7 controller) is simultaneously connected with
the DC UPS, the web server is in the read-only mode. In this case, the function scope is
restricted.
● No write access is possible; the parameter settings can only be read (input values shown
gray)
● No firmware update is possible, the item is hidden
3.6.3
Functions of the Web server
The functions of the Web server are divided into the two menus.
Display
The following functions are available:
● View data of the UPS1600 (base device), see Viewing the UPS1600 (base device) data
(Page 93)
● View the energy storage data, see Viewing the energy storage data (Page 93)
● Alarm monitoring (pending alarms, alarm history), see Alarm monitoring (Page 94)
HW configuration
The following functions are available:
● Configuration of the communications interface, see Configuring the communications
interface (Page 95)