User manual

Engineering
3.5 SITOP UPS Manager
SITOP UPS1600 / UPS1100
Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
79
3.5.6
Establishing a connection via USB
1. Connect the UPS1600 using a USB cable with the client (PC/PG).
2. Select "General settings > Device configuration".
3. Activate the "USB" checkbox.
4. If you are prompted as to whether you want to restart the SITOP UPS Manager, confirm
this with "Yes".
The SITOP UPS Manager is restarted.
5. Check that the connection lamps light green.
The connection lamps light green; the connection to the UPS1600 via USB has been
established.
3.5.7
Configuration in the SITOP UPS Manager
Once you have connected the UPS1600 and the SITOP UPS Manager , you have the
following configuration options:
● Create a new configuration.
● Load a configuration from a data medium or from a device.
● Change a configuration.
● Store a configuration on a data medium or load it into a device.
Procedure
1. Enter the required configuration in the SITOP UPS Manager .
Alternatively, you can load a saved configuration using the "Upload from device"
command in the save bar "Configurations".
2. Click in the "Configurations save bar" on the "Download to device" button.
The configuration is loaded to the UPS1600.