User manual

Engineering
3.5 SITOP UPS Manager
SITOP UPS1600 / UPS1100
78 Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
5. Enter the IP address of the master PC into the "IP address of the master PC when slave
operation" field.
Note
The IP address of the master PC must also be specified on the master PC in the SITOP
UPS Manager .
6. Enter the IP address of the UPS1600 into the "IP address of the UPS if in master mode"
field.
7. If you are prompted as to whether you want to restart the SITOP UPS Manager, confirm
this with "Yes".
The SITOP UPS Manager is restarted.
The connection lamps light green; the connection as master PC to the UPS1600 has been
established.
Configuring the client as slave PC
1. Select "General settings > Device configuration".
2. Activate the "Ethernet" checkbox and the "Slave PC" checkbox.
3. If you are prompted as to whether you want to restart the SITOP UPS Manager, confirm
this with "Yes".
The SITOP UPS Manager is restarted.
4. Select "Hardware configuration > Ethernet configuration".
5. Enter the IP address of the master PC into the "IP address of the master PC when slave
operation" field.
6. If you are prompted whether you want to restart the SITOP UPS Manager, confirm this
with "Yes".
The SITOP UPS Manager is restarted.
The connection lamps light green; the connection as slave PC to the master PC has been
established.