User manual

Engineering
3.5 SITOP UPS Manager
SITOP UPS1600 / UPS1100
72 Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
3.5.3
Installation/uninstallation
The installation file for the SITOP UPS Manager is available at no charge on the SITOP
home page (http://www.siemens.de/sitop-usv) or directly under
(http://support.automation.siemens.com/WW/view/de/75854607).
Operational requirements
Operating systems
The Windows XP and Windows 7 (32 bit and 64 bit) operating systems are supported.
Ethernet or USB interface
To install and use the SITOP UPS Manager in conjunction with the UPS1600, the computer
must be connected with the UPS1600 via Ethernet or USB port.
Windows user group
Users of the SITOP UPS Manager must be members of the Windows user group "power
users".
Installation preconditions
Administration rights
You require administrator rights to install the SITOP UPS Manager.
Installation paths without blanks
Note
Paths must not contain any blanks!
The path names of the directories for UPS Manager and batch files must not contain any
blanks.
Installation steps
1. Close all applications before you start the installation.
2. Download the installation file under
(http://support.automation.siemens.com/WW/view/de/75854607) and save it in a local
directory.
3. Open the local directory.
4. Double-click on the "SetupSITOPUPSManager_" file.