User manual

Engineering
3.5 SITOP UPS Manager
SITOP UPS1600 / UPS1100
70 Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
3.5
SITOP UPS Manager
Note
Ensure that only the UPS Manager accesses the UPS1600.
3.5.1
Functions of the SITOP UPS Manager
The main tasks that you can perform with the SITOP UPS Manager:
● Configuration of the SITOP UPS1600 uninterruptible power supply and the battery
modules
● Protection of a computer or a computer network provided by the uninterruptible power
supply with the master-slave operation
● Data backup by controlled shutdown, and
● Alarm-controlled starting of any applications (SMS, e-mail).
With the specification of further applications and alarms, you define a comprehensive
protection of your computer or computer network.
The applications can be started depending on the following events:
● Supply voltage failure
● Restoration of the supply voltage
● State of the buffer readiness by the UPS:
– General buffer readiness
– Remaining buffer time
● Status of the UPS battery:
– Battery replacement required
– Battery charge