User manual

Engineering
3.4 STEP 7 V5
SITOP UPS1600 / UPS1100
Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
69
3.4.8
Restore factory settings
From STEP 7 V5.5, it is possible to restore the factory setting of modules using the "Target
system -> Edit Ethernet nodes".
Click the "Browse" button in the "Edit Ethernet nodes" dialog to select the MAC address of
the UPS1600 where the factory settings should be restored. Then click on the "Reset"
button. This deletes the IP address and the device name from the module.