User manual

Engineering
3.3 STEP 7 in the TIA-Portal
SITOP UPS1600 / UPS1100
56 Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
Proceed as follows to restore the UPS1600 factory settings:
1. Select UPS1600 in the Network view and change to the Device view.
2. In the shortcut menu of the UPS1600, select "Reset to factory settings".
3. Activate the "Retain IP address" checkbox when you want to retain the IP address, or the
"Delete IP address" checkbox, if you want to delete the IP address.
4. Click on the "Reset" button.
5. Respond to the confirmation prompt with "OK".