User manual

Engineering
3.3 STEP 7 in the TIA-Portal
SITOP UPS1600 / UPS1100
Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
45
4. Drag the UPS1100 battery module and drop it into the Device view.
Alternatively, the UPS1100 battery module can be added by double-clicking on the entry
in the hardware catalog.
5. Drag the UPS1100 battery module and drop at the first free slot to the right next to the
UPS1600.
The UPS1100 battery module is inserted at the selected slot.
6. Save the hardware configuration.
Section Parameterizing UPS1600 with STEP 7 in the TIA Portal (Page 46) describes how
you can change the number and type of UPS1100 battery module used.