User manual

Engineering
3.3 STEP 7 in the TIA-Portal
SITOP UPS1600 / UPS1100
Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
43
Assigning the UPS1600 a controller
To be able to use UPS1600, it must be assigned to an IO controller as an IO device.
1. Click in the network view on the blue lettering "Not assigned" at the left next to the symbol
of the UPS1600.
A menu opens with the available controllers.
2. Select a controller in the menu.
3. Select the connection between the controller and UPS1600.
4. Make the required settings in the "Network data".
5. Double-click on UPS1600, to display it in the device view.