User manual

Engineering
3.3 STEP 7 in the TIA-Portal
SITOP UPS1600 / UPS1100
Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
41
3.3
STEP 7 in the TIA-Portal
The UPS1600 can be used with STEP 7 in the TIA Portal from version 12 with service pack
1 (SP1).
In STEP 7 in the TIA Portal the UPS1600 can be integrated, parameterized and diagnosed in
projects.
Note
TIA and UPS Manager cannot simultaneously access the UPS. It is not permissible that UPS
Managers service runs whileTIA is being accessed.
3.3.1
Installing the Hardware Support Package
To use the UPS1600, you must install the corresponding hardware support package (HSP)
in the TIA-Portal . We make this HSP available to you on our SITOP homepage
(http://www.siemens.de/sitop-usv) or directly under
(http://support.automation.siemens.com/WW/view/de/75854606).
Procedure
To install the Hardware Support Package, proceed as follows:
1. Start STEP 7 in the TIA Portal as administrator.
2. Click in the menu "Tools" on "Support Packages".
The "Detailed information" dialog opens. All Support Packages from the directory that you
specified as storage location for Support Packages in the settings are listed in a table.
3. You have the following possibilities to install the Hardware Support Package:
– If the Support Package is already present on your computer or on the supplied DVD,
you can add it to the list from the "Add from the file system".
– If you want to add a Support Package from the "Service & Support" page in the
Internet, first download it with "Load from the Internet".
You can then add it to the file system.
4. Select the Support Package that you want to install.
5. Click on "Install", and follow the instructions of the installation program.
6. Exit the TIA-Portal and then restart it.
Note
You can find additional information on installing hardware support packages in the STEP 7
manual in the TIA Portal.