User manual

SITOP UPS1600 / UPS1100
Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
37
Engineering
3
3.1
General information
Contents of the "Engineering" section
This section describes those software tools offered by Siemens that are compatible with
SITOP UPS1600 . The software tools are introduced with their functions, the associated
requirements and the operation. The software products are:
● STEP 7 in the TIA Portal from V12
● STEP 7 V5.4 or higher
● SITOP UPS Manager
● Web server
Functions of the individual software products
●
STEP 7 in the TIA Portal
The UPS1600 can be used with STEP 7 in the TIA Portal from Version 12 with service
pack 1 (SP1).
As the UPS1600 has been saved in the hardware catalog of STEP 7 in the TIA Portal , it
can be integrated in the project, parameterized and diagnosed.
●
STEP 7 V5
The UPS1600 can be used with STEP 7 V5 from Version 5.4.
As UPS1600 has been saved in the hardware catalog of STEP 7 V5 it can be integrated
in the project, parameterized and diagnosed.
●
SITOP UPS Manager
UPS1600 can be parameterized with SITOP UPS Manager . In addition, the protection of
individual computers or computer networks can be determined by shutdown conditions
after the failure of the supply voltage.
●
Web server
The web server can be used to check the parameters and diagnose the UPS1600.
Note
SITOP UPS Manager and TIA cannot simultaneously access the UPS1600.