User manual

Description, device design, dimension drawing
2.2 Connections and terminal designation
SITOP UPS1600 / UPS1100
Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
19
2.2.2
UPS1100
2.2.2.1
Power terminals
The input terminals ① and the signal terminal ② can be used to establish the connection to
the UPS1600 (see also Section Installation (Page 107))
Connections and terminal designations (see Figure 2-2 UPS1100 design (example 6EP4133-0GB00-
0AY0) (Page 14))
① DC input +, -
One screw terminal each
②
Signal terminal 1, 2
One screw terminal each
Figure 2-8 Terminal data for 6EP4131-0GB00-0AY0 and 6EP4133-0GB00-0AY0
Figure 2-9 Terminal data for 6EP4134-0GB00-0AY0