User manual

Description, device design, dimension drawing
2.2 Connections and terminal designation
SITOP UPS1600 / UPS1100
18 Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
2.2.1.4
PROFINET/Ethernet connection
Figure 2-7 PROFINET/Ethernet connection
Ethernet interface ⑤ corresponds to the standard full duplex with up to 100 Mbit/s electrical
(100BASE-TX) according to IEEE 802.3.
Properties of the Ethernet interface:
● Transmission rate 10/100 Mbit/s
● Two RJ45 sockets, i.e. integrated switch, for RJ45 connector
● Cable type 100Base-TX (CAT5)
● Auto negotiation
● Auto crossover communication via TCP/IP and PROFINET
The strain relief (see Section PROFINET/Ethernet connector (Page 99)) is implemented
using a Siemens IE FastConnect RJ45.
The physics of the Ethernet interface is implemented so that PROFINET IO is possible in
accordance with the standards IEC 61158 and IEC 61784-2. For PROFINET, conformance
class B must be maintained as a minimum.
The Ethernet/PROFINET interface permits:
● Configuration and monitoring using the SITOP UPS Manager
● Monitoring via the Web server
● Integration and communication of the DC-UPS with other automation components from
Siemens and the open environment, e.g. IPC, PLC, HMI
● Firmware update of the device via UPS Manager or STEP 7