User manual

Description, device design, dimension drawing

2.2 Connections and terminal designation

SITOP UPS1600 / UPS1100

Operating Instructions, 05.2014, C98130-A7628-A1-4-7629

2.2

Connections and terminal designation

2.2.1

UPS1600

2.2.1.1

Power terminals

The input terminals ① can be used to establish the connection to the supply voltage. The

output terminals

② are used to connect to the supplied loads.

The deployed cables must be suitable for temperatures of at least 90° C. (only for

applications for UL508)

The UPS1100 battery modules are connected via BAT

③.

(see also Section Installation (Page 107))

Connections and terminal designations (see Figure 2-1 UPS1600 design (example 6EP4136-3AB00-

2AY0) (Page 13))

① DC input IN+, IN-

One screw terminal each

②

DC output OUT+, OUT-

One screw terminal each

③

BAT+, BAT-

One screw terminal each

④

Signal connector

Connector with 14 screw terminals

⑤

PROFINET (Ethernet) connection

RJ45 plug contact

⑥

USB connection

USB-B plug contact

Figure 2-3 UPS1600 terminal data