User manual

SITOP UPS1600 / UPS1100
Operating Instructions, 05.2014, C98130-A7628-A1-4-7629
107
Installation
6
Note
For installation of the devices, the relevant country
-specific regulations must be observed.
The 24
V supply voltage must be SELV in accordance with EN60950-1 and EN50178.
Only qualified personnel are allowed to
install the device/system and set it into operation.
The connections must not be attached or detached during operation.
Note
For UPS1100
The self
-discharge rate of the rechargeable batteries is approx. 3%/month for a temperature
of 20° C. This value
is temperature dependent, and for an increasing temperature, becomes
more unfavorable and for a decreasing temperature, more favorable.
The fuses should only be inserted in the fuse holder when commissioning the device.
Figure 6-1 Wiring