Datasheet

I²t, max. 1A²·s
Built-in incoming fuse T 3.15 A (not accessible)
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: 6-10 A characteristic C
Output
Output Controlled, isolated DC voltage
Number of outputs 2
Rated voltage Vout DC 15V
Output voltage 2 x 15 V DC
● at output 1 at DC Rated value
15V
● at output 2 at DC Rated value
15V
Total tolerance, static ± 1%
Static mains compensation, approx. 0.1%
Static load balancing, approx. 1%
Residual ripple peak-peak, max. 50mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 150mV
Adjustment range 12...28V
Product function Output voltage adjustable Yes
Output voltage setting via potentiometer per output
Status display Green LED grün for Vout >10 V (summation display)
Signaling -
On/off behavior Overshoot of Vout < 1 %
Startup delay, max. 0.5s
Rated current value Iout rated 3.5A
Output current
● at output 1 Rated value
3.5A
● at output 2 Rated value
3.5A
Current range 0...3.5A
● Note
Output power max. 60 W per output
Supplied active power typical 105W
Parallel switching for enhanced performance Yes
Numbers of parallel switchable units for enhanced
performance
2
Efficiency
Efficiency at Vout rated, Iout rated, approx. 88%
Power loss at Vout rated, Iout rated, approx. 18W
Protection and monitoring
Output overvoltage protection ≤ 35 V
Current limitation 5A
Current limitation depending on the voltage setting
Property of the output Short-circuit proof Yes
Short-circuit protection Electronic shutdown, automatic restart
Overload/short-circuit indicator -
6EP3323-0SA00-0BY0 Subject to change without notice
Page 2/
4
06/27/2019 © Copyright Siemens