Datasheet

Output Controlled, isolated DC voltage

Rated voltage Vout DC 24V

Total tolerance, static ± 1%

Static mains compensation, approx. 0.1%

Static load balancing, approx. 0.2%

Residual ripple peak-peak, max. 150mV

Residual ripple peak-peak, typ. 30mV

Spikes peak-peak, max. (bandwidth: 20 MHz) 250mV

Spikes peak-peak, typ. (bandwidth: 20 MHz) 70mV

Adjustment range 24...28V

Product function Output voltage adjustable Yes

Output voltage setting via potentiometer

Status display Green LED for 24 V OK

On/off behavior No overshoot of Vout (soft start)

Startup delay, max. 0.5s

Voltage rise, typ. 10ms

Voltage increase time of the output voltage maximum 20ms

Rated current value Iout rated 3.5A

Current range 0...3.5A

● Note

+60 to +70 °C: without derating

Supplied active power typical 91W

Parallel switching for enhanced performance Yes

Numbers of parallel switchable units for enhanced

performance

Efficiency

Efficiency at Vout rated, Iout rated, approx. 90%

Power loss at Vout rated, Iout rated, approx. 7W

Power loss [W] during no-load operation maximum 1.5W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %),

max.

0.3%

Dynamic load smoothing (Iout: 50/100/50 %), Uout ±

typ.

2%

Load step setting time 50 to 100%, typ. 1ms

Load step setting time 100 to 50%, typ. 1ms

Protection and monitoring

Output overvoltage protection Ua < 35 V

Current limitation, typ. 3.8A

Property of the output Short-circuit proof Yes

Short-circuit protection Electronic shutdown, automatic restart

Overload/short-circuit indicator Yellow LED overload

Safety

6EP3233-0TA10-0AY0 Subject to change without notice

Page 2/