Datasheet

Type of channel connection Simultaneous connection of all channels after power up of the supply

voltage > 20 V, delay time of 25 ms, 100 ms or adjustable "load

optimised" via DIP switch for sequential connection

Efficiency

Efficiency at Vout rated, Iout rated, approx. 97 %

Power loss at Vout rated, Iout rated, approx. 9 W

Switch-off characteristic per channel

Overcurrent switch-off Iout = 1.0 ...1.3 x set value, switch-off after approx. 5 s

Current limitation Iout = 1.3 x set value, switch-off not before typ. 100 ms

Immediate switch-off Iout > set value snd Vin < 20 V, switch-off after approx. 0.5 ms

Reset Using keys for each channel

Remote reset Non-isolated 24 V input (signal level "high" at > 15 V)

Protection and monitoring

Device/Line protection 5 A internal fuse per channel (not accessible)

Status display Three-color LED per channel: green LED for "Output switched

through"; yellow LED for "Output switched off manually"; red LED for

"Output switched off due to overcurrent"

Safety

Standard / for security according to EN 60950-1 and EN 50178

Protection class Class III

CE mark Yes

Degree of protection (EN 60529) IP20

UL/cUL (CSA) approval UL-Recognized (UL 2367) File E328600; cURus (UL 508, CSA

C22.2 No. 107.1) File E197259

Standard / for explosion protection ATEX (EN 60079-x); cCSAus (CSA C22.2 No. 60079-x, UL 60079-x)

Explosion protection ATEX (EX) II 3G Ex nA IIC T4 Gc; cCSAus Class I, Div. 2, Group

ABCD, T4

EMC

Emitted interference EN 55022 Class B

Noise immunity EN 61000-6-2

Operating data

Ambient temperature

• in operation 0 … 60 °C

• Note with natural convection

Ambient temparature

• on transport -40 … +85 °C

• in storage -40 … +85 °C

Humidity class according to EN 60721 Climate class 3K3, no condensation

Mechanics

Connection technology screw-type terminals

Design of the electrical connection

6EP1961-2BA31

Page 2/ 11/02/2012

subject to modifications