Datasheet

Built-in incoming fuse F 4 A/250 V (not accessible)
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 6 A characteristic
C, suitable for DC
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24V
Total tolerance, static ± 3%
Static mains compensation, approx. 0.1%
Static load balancing, approx. 0.1%
Residual ripple peak-peak, max. 150mV
Residual ripple peak-peak, typ. 50mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 240mV
Spikes peak-peak, typ. (bandwidth: 20 MHz) 50mV
Product function Output voltage adjustable No
Output voltage setting -
Status display Green LED for 24 V OK
On/off behavior No overshoot of Vout (soft start)
Startup delay, max. 2.5s
Voltage rise, typ. 90ms
Rated current value Iout rated 0.375A
Current range 0...0.375A
● Note
+60 ... +70 °C: Derating 3%/K
Supplied active power typical 9W
Short-term overload current
● at short-circuit during operation typical
2.7A
Duration of overloading capability for excess current
● at short-circuit during operation
200ms
Parallel switching for enhanced performance No
Efficiency
Efficiency at Vout rated, Iout rated, approx. 66%
Power loss at Vout rated, Iout rated, approx. 4.6W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %),
max.
0.3%
Dynamic load smoothing (Iout: 50/100/50 %), Uout ±
typ.
0.4%
Load step setting time 50 to 100%, typ. 2ms
Load step setting time 100 to 50%, typ. 2ms
Protection and monitoring
Output overvoltage protection Yes, according to EN 60950-1
Current limitation 0.41...0.49A
Property of the output Short-circuit proof Yes
6EP1731-2BA00 Subject to change without notice
Page 2/
4
11/22/2016 © Copyright Siemens AG