Datasheet

ManualsBrandsSiemens ManualsDIN-Rail Power SuppliesSITOP PSU300E DIN Rail Power Supply, Adjustable, 24V, 5A, 120W

Data sheet 6EP1433-0AA00

SITOP PSU300E 24 V/5 A STABILIZED POWER SUPPLY INPUT: 3

400-500 V AC OUTPUT: 24 V/5 A DC

Technical specifications

Product SITOP PSU300E

Power supply, type 24 V/5 A

Input

Input 3-phase AC

Rated voltage value Vin rated 400...500V

Voltage range AC 320...550V

Wide-range input Yes

Mains buffering at Iout rated, min. 50ms; at Vin = 400 V

Rated line frequency 50...60Hz

Rated line range 47...63Hz

Input current at rated input voltage 400 V Rated

value

0.36A

Input current at rated input voltage 500 V Rated

value

0.29A

Switch-on current limiting (+25 °C), max. 15A

I²t, max. 0.9A²·s

Built-in incoming fuse none

Protection in the mains power input (IEC 898) Required: 3-pole connected miniature circuit breaker 6 A

characteristic B or C or circuit breaker 3RV2011-1DA10 (setting 3

A) or 3RV2711-1DD10 (UL 489)

Output

Output Controlled, isolated DC voltage

Rated voltage Vout DC 24V

Total tolerance, static ± 3%

6EP1433-0AA00 Changes preserved

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6EP1433-0AA00 SITOP PSU300E 24 V/5 A STABILIZED POWER SUPPLY INPUT: 3 400-500 V AC OUTPUT: 24 V/5 A DC Technical specifications Product SITOP PSU300E Power supply, type 24 V/5 A Input Input 3-phase AC Rated voltage value Vin rated 400 ... 500 V Voltage range AC 320 ... 550 V Wide-range input Yes Mains buffering at Iout rated, min. 50 ms; at Vin = 400 V Rated line frequency 50 ... 60 Hz Rated line range 47 ... 63 Hz Input current at rated input voltage 400 V Rated value 0.
PAGE 2
Static mains compensation, approx. 3% Static load balancing, approx. 3% Residual ripple peak-peak, max. 150 mV Residual ripple peak-peak, typ. 35 mV Spikes peak-peak, max. (bandwidth: 20 MHz) 240 mV Spikes peak-peak, typ. (bandwidth: 20 MHz) 70 mV Adjustment range 24 ... 29 V Product function Output voltage adjustable Yes Output voltage setting via potentiometer; max. 120 W Status display Green LED for 24 V OK Signaling Relay contact (NO contact, rating 60 V DC/ 0.
PAGE 3
Output overvoltage protection Yes, according to EN 60950-1 Current limitation, typ. 11 A Property of the output Short-circuit proof Yes Short-circuit protection Electronic shutdown, automatic restart Enduring short circuit current RMS value maximum 7.5 A Safety Primary/secondary isolation Yes Galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 Protection class Class I CE mark Yes UL/CSA approval Yes UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.
PAGE 4
Product property of the enclosure housing for sideby-side mounting Yes Installation Snaps onto DIN rail EN 60715 35x7.5/15 Other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) 6EP1433-0AA00 Page 4/4 19.03.