Datasheet

Output voltage 2 x 15 V DC

Output voltage at output 1 for DC Rated value 15V

Output voltage at output 2 for DC Rated value 15V

Total tolerance, static ± 2%

Static mains compensation, approx. 0.2%

Static load balancing, approx. 0.2%

Residual ripple peak-peak, max. 50mV

Residual ripple peak-peak, typ. 20mV

Spikes peak-peak, max. (bandwidth: 20 MHz) 150mV

Adjustment range 14.5...17V

Product function Output voltage adjustable Yes

Output voltage setting via potentiometer

Status display Green LED grün for Vout >10 V (summation display)

Signaling -

On/off behavior Overshoot of Vout < 3 %

Startup delay, max. 1s

Rated current value Iout rated 3.5A

Output current at output 1 Rated value 3.5A

Output current at output 2 Rated value 3.5A

Current range 0...3.5A

● Note

+45 ... +60 °C: Derating 2%/K

Active power supplied typical 105W

Parallel switching for enhanced performance Yes

Numbers of parallel switchable units for enhanced

performance

Efficiency

Efficiency at Vout rated, Iout rated, approx. 80%

Power loss at Vout rated, Iout rated, approx. 27W

Protection and monitoring

Output overvoltage protection Yes, according to EN 60950-1

Current limitation 4.9A

Current limitation Limit point < 4.9 A; switch-off point < 6 A

Property of the output Short-circuit proof Yes

Short-circuit protection Electronic shutdown, automatic restart

Overload/short-circuit indicator -

Safety

Primary/secondary isolation Yes

Galvanic isolation Safety extra low output voltage Vout according to EN 60950-1

Protection class Class I

Leakage current maximum 3.5mA

CE mark Yes

UL/CSA approval Yes

6EP1353-0AA00 Changes preserved

Page 2/