Datasheet

Protection and monitoring

Output overvoltage protection Yes, according to EN 60950-1

Current limitation, typ. 21 A

Characteristic feature of the output / short-circuit protected Yes

Short-circuit protection Electronic shutdown, automatic restart

Enduring short circuit current / Effective level / maximum 7 A

Enduring short circuit current / Effective level / typical

• Note overload capability 150 % Iout rated up to 5 s/min

Overload/short-circuit indicator -

Safety

Primary/secondary isolation Yes

Potential separation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN

50178

Protection class Class I

stray current / maximum 3.5 mA

stray current / typical 1 mA

CE mark Yes

UL/CSA approval Yes

UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; in

preparation: cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)

Explosion protection ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213,

ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4

FM approval -

CB approval Yes

Marine approval GL

Degree of protection (EN 60529) IP20

EMC

Emitted interference EN 55022 Class B

Supply harmonics limitation EN 61000-3-2

Noise immunity EN 61000-6-2

Operating data

Ambient temperature / in operation 0 … 70 °C

• Note with natural convection

Ambient temperature / on transport -40 … +85 °C

Ambient temperature / in storage -40 … +85 °C

Humidity class according to EN 60721 Climate class 3K3, no condensation

Mechanics

Connection technology screw-type terminals

Connections / Supply input L1, N, PE: 1 screw terminal each for 0.2 ... 4 mm² single-core/finely

stranded

Connections / Output +, -: 2 screw terminals each for 0.2 ... 4 mm²

6EP1336-2BA10

Page 3/ 04/04/2014

subject to modifications