Datasheet

Built-in incoming fuse T 10 A (not accessible)

Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic C

or circuit-breaker 3RV2411-1JA10 (120 V) or 3RV2411-1FA10 (230

Output

Output Controlled, isolated DC voltage

Rated voltage Vout DC 24 V

Total tolerance, static ± 3 %

Static mains compensation, approx. 0.5 %

Static load balancing, approx. 1 %

Residual ripple peak-peak, max. 150 mV

Spikes peak-peak, max. (bandwidth: 20 MHz) 240 mV

Adjustment range 24 … 28 V

Product feature / output voltage adjustable Yes

Output voltage setting via potentiometer

• Note max. 480 W

Status display Green LED for 24 V OK

Signaling Relay contact (NO contact, rating 50 V DC/ 0.3 A) for "24 V OK"

On/off behavior No overshoot of Vout (soft start)

Startup delay, max. 1.5 s

Voltage rise, typ. 50 ms

Voltage increase time / of the output voltage / maximum 500 ms

Rated current value Iout rated 20 A

Current range 0 … 20 A

• Note 24 A up to +45°C; +60 ... +70 °C: Derating 5%/K

delivered active power / typ. 480 W

short-term overload current / at short-circuit during run-up / typical 35 A

Duration of overloading ability for excess current / on short-circuiting

during the start-up

100 ms

short-term overload current / at short-circuit during operation / typical 35 A

Duration of overloading ability for excess current / on short-circuiting

during the operational phase

100 ms

Parallel switching for enhanced performance Yes

Numbers of parallel switchable units for enhanced performance 2

Efficiency

Efficiency at Vout rated, Iout rated, approx. 90 %

Power loss at Vout rated, Iout rated, approx. 53 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max. 1 %

Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 3 %

Setting time / maximum 10 ms

6EP1336-2BA10

Page 2/ 04/04/2014

subject to modifications