Datasheet

Product data sheet 6EP1336-2BA10

SITOP PSU100S 20 A STABILIZED POWER SUPPLY

INPUT: 120/230 V AC OUTPUT: 24 V/20 A DC

Technical specifications

Product SITOP PSU100S

Power supply, type 24 V/20 A

Input

Input 1-phase AC

Supply voltage / 1 / at AC / nominal value 120 V

Supply voltage / 2 / at AC / nominal value 230 V

Voltage range

• Note Automatic range selection

Input voltage / 1 / at AC 85 … 132 V

Input voltage / 2 / at AC 176 … 264 V

Wide-range input No

Overvoltage resistance 2.3 × Vin rated, 1.3 ms

Mains buffering at Iout rated, min. 20 ms

Mains buffering at Vin = 120/230 V

Rated line frequency 50 / 60 Hz

Rated line range 47 ... 63 Hz

Input current / at nominal level of the input voltage 120 V 7.5 A

Input current / at nominal level of the input voltage 230 V 3.5 A

Switch-on current limiting (+25 °C), max. 11 A

I²t, max. 10 A²·s

6EP1336-2BA10

Page 1/ 04/04/2014

subject to modifications

PAGE 1
Product data sheet 6EP1336-2BA10 SITOP PSU100S 20 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/20 A DC Technical specifications Product SITOP PSU100S Power supply, type 24 V/20 A Input Input 1-phase AC Supply voltage / 1 / at AC / nominal value 120 V Supply voltage / 2 / at AC / nominal value 230 V Voltage range • Note Automatic range selection Input voltage / 1 / at AC 85 … 132 V Input voltage / 2 / at AC 176 … 264 V Wide-range input No Overvoltage resistance 2.
PAGE 2
Built-in incoming fuse T 10 A (not accessible) Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic C or circuit-breaker 3RV2411-1JA10 (120 V) or 3RV2411-1FA10 (230 V) Output Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Total tolerance, static ± 3% Static mains compensation, approx. 0.5 % Static load balancing, approx. 1% Residual ripple peak-peak, max. 150 mV Spikes peak-peak, max.
PAGE 3
Protection and monitoring Output overvoltage protection Yes, according to EN 60950-1 Current limitation, typ.
PAGE 4
Connections / Auxiliary 13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm² Width / of the housing 115 mm Height / of the housing 145 mm Depth / of the housing 150 mm Installation width 120 mm Mounting height 245 mm Weight, approx. 2.