Datasheet

Power loss at Vout rated, Iout rated, approx. 24W
Power loss [W] during no-load operation maximum 6W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %),
max.
0.1%
Dynamic load smoothing (Iout: 50/100/50 %), Uout ±
typ.
3%
Load step setting time 50 to 100%, typ. 2ms
Load step setting time 100 to 50%, typ. 2ms
Setting time maximum 5ms
Protection and monitoring
Output overvoltage protection < 35 V
Current limitation, typ. 12A
Property of the output Short-circuit proof Yes
Short-circuit protection Alternatively, constant current characteristic approx. 12 A or
latching shutdown
Enduring short circuit current RMS value
● typical
12A
Overload/short-circuit indicator LED yellow for "overload", LED red for "latching shutdown"
Safety
Primary/secondary isolation Yes
Galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN
50178
Protection class Class I
Leakage current
● maximum
3.5mA
● typical
0.32mA
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc
(für AC 120-230/230-400 V); cCSAus (CSA C22.2 No. 213,
ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3
CB approval No
Marine approval ABS, DNV GL
Degree of protection (EN 60529) IP20
EMC
Emitted interference EN 55022 Class B
Supply harmonics limitation EN 61000-3-2
Noise immunity EN 61000-6-2
Operating data
Ambient temperature
● during operation
-25...+70°C
6EP1334-3BA10-8AB0 Subject to change without notice
Page 3/
4
04/16/2018 © Copyright Siemens