Datasheet

ManualsBrandsSiemens ManualsDIN-Rail Power SuppliesSITOP PSU200M Stabilized Power Supply, Adjustable, 24V, 10A, 240W

Data sheet 6EP1334-3BA10-8AB0

SITOP PSU200M 24 V/10 A, VARNISHED PCB

SITOP PSU200M plus 10 A Stabilized power supply input: AC 120-

230/230-500 V output: DC 24 V/10 A Option for with protective

varnish

Input

Input 1-phase and 2-phase AC

Supply voltage

● 1 at AC

120...230V

● 2 at AC

230...500V

● Note

Set by means of selector switch on the device

Input voltage

● 1 at AC

85...264V

● 2 at AC

176...550V

Wide-range input Yes

Overvoltage resistance 1300 Vpeak, 1.3 ms

Mains buffering at Iout rated, min. 25ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V

Rated line frequency 1 50Hz

Rated line frequency 2 60Hz

Rated line range 47...63Hz

Input current

● at rated input voltage 120 V

4.4A

6EP1334-3BA10-8AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6EP1334-3BA10-8AB0 SITOP PSU200M 24 V/10 A, VARNISHED PCB SITOP PSU200M plus 10 A Stabilized power supply input: AC 120230/230-500 V output: DC 24 V/10 A Option for with protective varnish Input Input 1-phase and 2-phase AC Supply voltage ● 1 at AC 120 ... 230 V ● 2 at AC 230 ... 500 V ● Note Set by means of selector switch on the device Input voltage ● 1 at AC 85 ... 264 V ● 2 at AC 176 ... 550 V Wide-range input Yes Overvoltage resistance 1300 Vpeak, 1.
PAGE 2
● at rated input voltage 230 V 2.4 A ● at rated input voltage 500 V 1.1 A Switch-on current limiting (+25 °C), max. 35 A I²t, max. 4 A²·s Built-in incoming fuse T 6.3 A (not accessible) Protection in the mains power input (IEC 898) Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.
PAGE 3
Power loss at Vout rated, Iout rated, approx. 24 W Power loss [W] during no-load operation maximum 6W Closed-loop control Dynamic mains compensation (Vin rated ±15 %), max. 0.1 % Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 3% Load step setting time 50 to 100%, typ. 2 ms Load step setting time 100 to 50%, typ. 2 ms Setting time maximum 5 ms Protection and monitoring Output overvoltage protection < 35 V Current limitation, typ.
PAGE 4
— Note with natural convection ● during transport -40 ... +85 °C ● during storage -40 ... +85 °C Humidity class according to EN 60721 Climate class 3K3, no condensation Mechanics Connection technology screw-type terminals Connections ● Supply input L, N, PE: 1 screw terminal each for 0.2 ... 2.5 mm² singlecore/finely stranded ● Output +, -: 2 screw terminals each for 0.2 ... 2.5 mm² ● Auxiliary 13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.