Datasheet

Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 3 A, characteristic C

Output

Output Controlled, isolated DC voltage

Rated voltage Vout DC 24 V

Total tolerance, static ± 3 %

Static mains compensation, approx. 0.1 %

Static load balancing, approx. 1 %

Residual ripple peak-peak, max. 150 mV

Residual ripple peak-peak, typ. 30 mV

Spikes peak-peak, max. (bandwidth: 20 MHz) 240 mV

Spikes peak-peak, typ. (bandwidth: 20 MHz) 70 mV

Adjustment range 22.8 … 28 V

Product feature / output voltage adjustable Yes

Output voltage setting via potentiometer

Status display Green LED for 24 V OK

On/off behavior Overshoot of Vout < 3 %

Startup delay, max. 0.3 s

Voltage rise, typ. 15 ms

Rated current value Iout rated 2.5 A

Current range 0 … 3 A

• Note 1.75 A up to +70°C, 2.5 A up to +60 °C, 3 A up to +45 °C

delivered active power / typ. 60 W

short-term overload current / at short-circuit during run-up / typical 9 A

Duration of overloading ability for excess current / on short-circuiting

during the start-up

100 ms

short-term overload current / at short-circuit during operation / typical 9 A

Duration of overloading ability for excess current / on short-circuiting

during the operational phase

800 ms

Parallel switching for enhanced performance Yes

Numbers of parallel switchable units for enhanced performance 2

Efficiency

Efficiency at Vout rated, Iout rated, approx. 85 %

Power loss at Vout rated, Iout rated, approx. 10 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max. 0.3 %

Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. 3 %

Load step setting time 10 to 90%, typ. 1 ms

Load step setting time 90 to 10%, typ. 1 ms

Protection and monitoring

Output overvoltage protection < 33 V

6EP1332-2BA20

Page 2/ 11/01/2012

subject to modifications