Datasheet

Built-in incoming fuse T 6.3 A/250 V (not accessible)
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic
C
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 12V
Total tolerance, static ± 3%
Static mains compensation, approx. 0.1%
Static load balancing, approx. 1%
Residual ripple peak-peak, max. 150mV
Residual ripple peak-peak, typ. 20mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 240mV
Spikes peak-peak, typ. (bandwidth: 20 MHz) 100mV
Adjustment range 11.5...15.5V
Product function Output voltage adjustable Yes
Output voltage setting via potentiometer
Status display Green LED for 12 V OK
Signaling Relay contact (NO contact, rating 60 V DC/ 0.3 A) for 12 V OK
On/off behavior Overshoot of Vout < 3 %
Startup delay, max. 0.3s
Voltage rise, typ. 10ms
Rated current value Iout rated 14A
Current range 0...14A
● Note
+50 ... +70 °C: Derating 3.5%/K
Supplied active power typical 168W
Short-term overload current
● on short-circuiting during the start-up typical
40A
● at short-circuit during operation typical
40A
Duration of overloading capability for excess current
● on short-circuiting during the start-up
800ms
● at short-circuit during operation
800ms
Parallel switching for enhanced performance Yes
Numbers of parallel switchable units for enhanced
performance
2
Efficiency
Efficiency at Vout rated, Iout rated, approx. 87%
Power loss at Vout rated, Iout rated, approx. 24W
Closed-loop control
Dynamic load smoothing (Iout: 10/90/10 %), Uout ±
typ.
5%
Load step setting time 10 to 90%, typ. 1ms
Load step setting time 90 to 10%, typ. 1ms
6EP1323-2BA00 Subject to change without notice
Page 2/
4
04/17/2018 © Copyright Siemens