Datasheet
Bild 3: Befestigungsschrauben
Figure 3: Mounting screw
图 3: 安装螺钉
Bild 4: Befestigungsschrauben für Gewindebohrungen
Figure 4: Mounting screw for thread holes
图 4: 用于螺纹孔的安装螺钉
① + ②
SZS 0.6 x 3.5
1 x 0.32 -1.3 mm
2
1 x 0.32 -1.3 mm
2
AWG 22-16
Nm 1.23
7 mm Max.
Bild 5: Klemmendaten
Figure 5: Terminal data
图 5: 接线端子数据
① + ②
Bild 6: Aufbau
Figure 6: Structure
图 6: 设计
Für die Installation der Geräte sind die einschlägigen
länderspezischen Vorschriften zu beachten.
Wichtiger Hinweis: Eingangsseitig ist ein Leitungs- oder
Motorschutzschalter für Haupt- und Nebenstromstromkreis
vorzusehen.
Der Anschluss der Versorgungsspannung (1 AC 100-240 V) muss
gemäß IEC 60364 ausgeführt werden.
Siehe auch Bild 5
Aufbau
①
Netzeingang
②
DC-Ausgang
③
Kontrollleuchte
④
Potenziometer
Siehe auch Bild 6
Betriebsmodus
Signalisierung
LED grün: Ausgangsspannung OK
Technische Daten
6EP1321-1LD00 6EP1331-1LD00 6EP1332-1LD00
Eingangsgrößen
Eingangsnennspannung U
e,nenn
: 1 AC 100-240 V, 50-60 Hz
Spannungsbereich: 1 AC 85-264 V
Eingangsstrom I
a,nenn
:
0.9-0.5 A 1.2-0.7 A 1.7-1.0 A
Empfohlener Leitungsschutzschalter:
Charakteristik C: ab 10 A; Charakteristik B: ab 16 A
Für UL-Anwendungen ist das Gerät in Verbindung mit einer 20 A
Schutzeinrichtung (branch circuit) zu installieren (UL489 listed).
Leistungsaufnahme (Wirkleistung) Nennlast
42.8 W 58.8 W 87.2 W
Ausgangsgrößen
Ausgangsnennspannung U
a,nenn
:
12 V 24 V 24 V
Einstellbereich: Über Potenziometer
11-14 V 22-28 V 22-28V
Ausgangsnennstrom I
a,nenn
:
3.0 A 2.1 A 3.1 A
Umgebungstemperatur
Temperatur für Betrieb: -10 ... +70°C
Derating: ab +50°C: 2.5 % I
a,nenn
/°C
Eigenkonvektion
Schutzfunktion
Elektronische Abschaltung und automatischer Wiederanlauf
Eingebaute Eingangssicherung: intern
Abmessungen Länge x Breite x Höhe in mm:
98x97x38 128x97x38 128x97x38
Service und Support
http://support.automation.siemens.com
Telefon: + 49 (0) 911 895 7222
For installation of the devices, the relevant country-specic
regulations must be observed.
Important note: A miniature circuit breaker or motor circuit
breaker must be provided at the input side for branch and
supplementary circuit.
The connection for the supply voltage (1 AC 100-240 V) must be
designed in accordance with IEC 60364.
See also Figure 5
Structure
①
Line input
②
DC output
③
Indicator lamp
④
Potentiometer
See also Figure 6
Operating mode
Signaling
LED green: Output voltage OK
Technical Data
Service and Support
http://support.automation.siemens.com
Telephone: + 49 (0) 911 895 7222
服务与支持
http://support.automation.siemens.com
电话: + 49 (0) 911 895 7222
6EP1321-1LD00 6EP1331-1LD00 6EP1332-1LD00
Input variables
Rated input voltage U
in rated
: 1 AC 100-240 V, 50-60 Hz
Rated operating voltage: 1 AC 85-264 V
Rated input current I
in rated
:
0.9-0.5 A 1.2-0.7 A 1.7-1.0 A
Recommended miniature circuit breaker:
Characteristic C: from 10 A; Characteristic B: from 16 A
The unit shall be installed with branch circuit protective device 20A
(UL489 listed).
Power consumption (active power) nominal load
42.8 W 58.8 W 87.2 W
Output variables
Rated output voltage U
out rated
:
12 V 24 V 24 V
Setting range: set via potentiometer
11-14 V 22-28 V 22-28V
Rated output current I
out rated
:
3.0 A 2.1 A 3.1 A
Surrounding air temperature
Temperature for operation: -10 ... +70°C
Derating: from +50°C: 2.5 % I
out rated
/°C
Natural convection
Protective function
Electronic shutdown and automatic restart
Built-in incoming fuse: internal
Dimensions Height x Width x Depth in mm:
98x97x38 128x97x38 128x97x38
6EP1321-1LD00 6EP1331-1LD00 6EP1332-1LD00
输入参数值
额定输入电压 U
额定输入
: 单相交流 100-240 V, 50-60 Hz
额定工作电压: 单相交流 85-264 V
额定输入电流 I
额定输入
:
0.9-0.5 A 1.2-0.7 A 1.7-1.0 A
推荐的微型断路器:
C 特性: 容量应大于 10 A;B 特性: 容量应大于 16 A.
设备应安装有 20A 分流电路保护装置(通过 UL489 认证)
满载时的功率消耗(有功功率)
42.8 W 58.8 W 87.2 W
输出参数值
额定输出电压U
额定输出:
:
12 V 24 V 24 V
设置范围:通过电位器设置
11-14 V 22-28 V 22-28V
额定输出电流 I
额定输出
:
3.0 A 2.1 A 3.1 A
周围空气温度
工作温度: -10 到 +70°C
温度高于+50°C 时的降容系数: 2.5 % I
额定输出
/°C
自然对流
保护功能
电子关闭和自动重启
内置保险丝:内部
尺寸宽 x 高 x 深(毫米):
97x98x38 97x128x38 97x128x38
设备安装同时需遵循本国相关的作业规范。
重要提示: 在分支和辅助电路的输入侧必须提供一个微型断路器或动
力电路断路器保护。
必须按照 IEC 60364 标准设计供电电压(单相交流 100-240 V)
的连接。
另见图 5
结构
①
交流输入
②
直流输出
③
指示灯
④
电位器
另见图 6
操作模式
信号指标
绿色 LED 指示灯: 输出电压正常
技术数据
Chassis of
the device
Mounting
screw
Customer system
5 mm Min.
Accessories
Mounting
screw
Chassis of
the device
6 mm Max.
97 mm
38 mm
98 mm (6EP1321-1LD00)
128 mm (6EP1331-1LD00,
6EP1332-1LD00)
PSU100DA-02-U419, 05.2012