User Manual

LOGO!
Manual, 04/2011, A5E03556174-01
365
Abbreviations
F
AM Analog module
B1 Block number B1
BN Block Number
C LOGO! device designation: integrated clock
CM Communication Module
Cnt Count = Counter input
Co Connector
Dir Direction (of count, for example)
DM Digital Module
E LOGO! device designation: integrated Ethernet interface
EIB European Installation Bus
EIS EIB Interoperability Standard
En Enable = switching on (e.g., clock generators)
ETS EIB Tool Software
Fre Input for frequency signals to be analyzed
GF Basic Functions
Inv Input for inverting the output signal
KNX Konnex Association Standard for home and building electronic systems
L Data Log
NAI Network analog input
NAQ Network analog output
NI Network input
No Cam (parameter of the timer)
NQ Network output
o In LOGO! designations: without display
Par Parameter
R Reset input
R In LOGO! designations: Relay outputs
Ral Reset all = Input for resetting all internal values
S Set (latching relay, for example)
SF Special functions
SU Subunit
T Time = parameter
TD Text Display
Trg Trigger (parameter)
UDF User-Defined Function
0BA7 device The latest LOGO! Basic version, described in this manual