User Manual

Technical data
A.5 Technical data: LOGO! DM8 24 and LOGO! DM16 24
LOGO!
328 Manual, 04/2011, A5E03556174-01
LOGO! 24
LOGO! 24o
LOGO! 24C
LOGO! 24Co
Ohmic load/lamp load 10 Hz 10 Hz
Inductive load 0.5 Hz 0.5 Hz
1)
When LOGO! 24/24o, LOGO! 24C/24Co, LOGO! DM8 24 or LOGO! DM16 24 are switched on,
signal 1 is sent to the digital outputs for about 50 μs. Take this into account, especially when using
devices that react to short pulses.
2)
The maximum switching rate is only dependent on the switching program's cycle time.
A.5 Technical data: LOGO! DM8 24 and LOGO! DM16 24
LOGO! DM8 24 LOGO! DM16 24
Power supply
Input voltage 24 V DC 24 V DC
Permissible range 20.4 ... 28.8 V DC 20.4 ... 28.8 V DC
Reverse polarity protection Yes Yes
Permissible mains frequency - - - -
Power consumption from 24 V
DC
30 ... 45 mA
0.3 A per output
30 ... 45 mA
0.3 A per output
Power loss at 24 V 0.8 ... 1.1 W 0.8 ... 1.7 W
Digital inputs
Number 4 8
Electrical isolation No No
Number of high speed inputs 0 0
Input frequency
• Normal input
• High speed input
• max. 4 Hz
• - -
• max. 4 Hz
• - -
Max. continuous permissible
voltage
28.8 V DC 28.8 V DC
Input voltage
• Signal 0
• Signal 1
L+
• < 5 V DC
• > 12 V DC
L+
• < 5 V DC
• > 12 V DC
Input current at
• Signal 0
• Signal 1
• < 0.85 mA
• > 2 mA
• < 0.85 mA
• > 2 mA
Delay time at
• 0 to 1
• 1 to 0
• typ. 1.5 ms
• typ. 1.5 ms
• typ. 1.5 ms
• typ. 1.5 ms
Line length (unshielded) max. 100 m max. 100 m
Digital outputs