Install Instructions
Document No. 129-496
Installation Instructions
July 21 2010
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. OpenAir is a registered trademark of Siemens Schweiz AG. Product or company names mentioned herein may be
the trademarks of their respective owners.
© 2010 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technoligies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
847-215-1000
Your feedback is important to us. If you have
comments about this document, please send
them to sbt technical.editor.us.sbt@siemens.com
2-1/2 in. (60 mm)
SERVICE ENVELOPE
Anti-Rotation Screw
Must be Driven
in Fully for GDE/GLB
Actuators Only
TOP VIEW
END VIEW
D
E
VE0294R1
4 in. (100 mm)
SERVICE ENVELOPE
1 in. (25 mm)
SERVICE ENVELOPE
AT SIDES
8 in. (200 mm)
SERVICE ENVELOPE
SIDE VIEW
A
F
C
B
G
Figure 8. Three-way Ball Valve and Bracket with Actuator Dimensions in Inches (Millimeters).
Line
Size
Inch
(mm)
Product
Number
A
Length
C Length *
for Actuator
Codes 171A-D
Codes 173A-D
C Length *
for Actuator
Codes 171E-G
B
Height
G
Height
F
Height
Weight
1/2
(15)
599-10250
through
599-10255
3-1/2
(89)
7
(178)
7-5/8
(194)
3-1/4
(83)
2-3/8
(60)
8-3/4
(222)
1.60
(0.73)
3/4
(20)
599-10256 2-3/4
(70)
6-1/2
(165)
7-1/8
(181)
3-1/4
(83)
2
(51)
9-3/8
(238)
1.64
(0.74)
599-10257
3
(76)
6-3/4
(171)
7-3/8
(187)
3-3/4
(95)
2-1/2
(64)
9-3/4
(248)
2.26
(1.03)
599-10258
1
(25)
599-10259
4-1/2
(114)
7-3/4
(197)
8-3/8
(213)
4
(102)
3-1/4
(83)
10-3/4
(273)
3.56
(1.61)
599-10260
1-1/4
(30)
599-10261
3-5/8
(91)
7-1/4
(184)
7-7/8
(200)
4
(102)
2-3/4
(70)
10-1/4
(260)
3.50
(1.59)
599-10262
4-1/2
(114)
7-3/4
(197)
8-3/8
(213)
4
(102)
3-1/4
(83)
10-3/4
(273)
3.56
(1.61)
599-10263
1-1/2
(40)
599-10264
4
(102)
7-1/4
(184)
7-7/8
(200)
4-1/2
(114)
3-1/4
(83)
11
(279)
5.16
(2.34)
599-10265 4
(102)
7-1/4
(184)
7-7/8
(200)
4-1/2
(114)
3-1/4
(83)
11
(279)
5.16
(2.34)
599-10266
• All dimensions are in inches (mm)
and weights are in pounds (kg).
• Stamping on valve body indicates the
ball size, not necessarily the line size.
• Dimension “D”, Depth, is 3 inches
(76 mm).
• Dimension “E”, Handle, is
4 inches (102 mm).
•
* Dimension “C” is maximum length,
measured from the actuator, end
fitting, or mounting plate, whichever
extends the furthest.
2
(50)
599-10267
5
(127)
7-3/4
(197)
8-3/8
(213)
5-3/4
(146)
3-3/4
(95)
12-1/4
(311)
8.50
(3.86)
Document No.129-496
Printed in the USA
Page 6 of 6