User Guide

Technical Instructions RL 147 Positioning Relay
Document Number 155-038P25
April 1, 2005
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Powers is a registered trademark of Siemens Industry, Inc. Product or company names mentioned herein
may be the trademarks of their respective owners. © 2005 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
+ 1 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail]
Calibration,
Continued
Figure 13. Positioning Relay Mounted on a
VP 591/3 Flowrite Valve Actuator.
Table 15. Mounting Kit 147-311 for the
VP 591/3 Flowrite Valve Actuator.
Item Description Qty.
1 Mounting Bracket 1
Feedback Spring, Small
Cadmium Plate
2
2 Feedback Spring, Small
Red
2
Feedback Spring, Large
Green
2
3 Adjusting Screw, 6-1/2"
(165 mm)
1
4 Wing Nut 2
5 Lock Washer 1
6 Flat Washer 1
7 Spring Arm 1
8 5/16-18 × 1/2 long Cap
Screw
2
9 90° Elbow Connector 1
Dimensions
Figure 14. Dimensions in Inches (Millimeters).
Document No. 155-038P25
Printed in the USA
Page 14